DJI Spark Battery Not Charging Fix?
Hey there, drone enthusiasts! You know that trusty DJI Spark of yours, right? It’s been buzzing around for quite some time, but lately, you might have noticed that its battery is acting up. Don’t worry; you’re not alone. Many folks out there are grappling with the same issue. In this article, we’ll delve into the nitty-gritty of why your DJI Spark battery might not be charging and, more importantly, how you can breathe new life into it.
Let’s take a closer look at the possible reasons behind your unresponsive DJI Spark battery and explore some solutions to get it back in the game.
Table of Contents:
Why is Your DJI Spark Battery Acting Up?
So, you’re facing the frustrating situation where your DJI Spark battery just won’t charge. Here are eight common reasons for this issue, listed from the most likely to the least likely:
1. Battery is Fully Depleted
One of the main culprits is leaving your battery in storage for extended periods without a recharge. Those LiPo batteries are pretty sensitive; if you leave them fully charged or completely depleted for too long, they can become permanently damaged. The smart circuitry in DJI Spark batteries can only do so much to protect them.
Symptoms: When you press the power button, nothing happens – no LED lights, nothing. When you connect the charger, LEDs 1 and 2 might flash briefly, but it’s essentially the charging circuit performing CPR on a battery with no life left.
Solution: DJI’s official stance is to replace the battery if it’s been stored incorrectly for an extended period. However, some DIY enthusiasts have had success reviving these batteries. You can try using a high-ampere charger, connecting the battery to your laptop for a charge, or leaving it plugged in overnight to jumpstart it. If all else fails, you might have to admit your battery is beyond saving.
2. Battery in Hibernation Mode
Sometimes, your battery might be in hibernation mode. This mode is designed to protect your battery during long periods of inactivity, such as when it’s shipped to you.
Symptoms: When your battery’s in hibernation, the power button doesn’t do anything, and it appears lifeless.
Solution: To wake up a hibernating battery, connect it to the charger and let it rest for 6-8 hours. You might not see immediate charging activity, but give it time. After this period, it should spring back to life.
3. Outdated Battery Firmware
Outdated firmware could also be the culprit, especially if there’s still some power left in your battery.
Solution: Insert the battery into your drone, connect your drone to your phone, and check for a firmware update. If prompted, update it to the latest version.
4. Charger Not Providing Enough Current
Using the official DJI Spark charger is always recommended. Third-party chargers may not provide the required current and voltage, leading to charging issues.
Solution: Stick to the official charger or ensure that any compatible charger you use can deliver 3A at 5V.
5. Damaged USB Cable
A damaged or low-quality USB cable could hinder your DJI Spark’s charging process.
Solution: Test different USB cables or replace your current one with a high-quality option. Avoid using converters from USB-C to micro USB, as they can cause problems.
6. Physical Damage to Drone or Battery
If you’ve had a rough landing or a collision, physical damage to the drone or battery might be the reason your battery isn’t charging.
Solution: Inspect your drone and battery for any signs of deformation or damage. If you find any, it’s best to dispose of the battery safely. If your drone is under warranty, contact DJI, or consider seeking help from a local repair shop.
7. Temperature Extremes
Charging a battery when it’s too hot or too cold can lead to unpredictable cell chemistry and permanent damage.
Solution: Your DJI Spark battery will only charge when the cell temperature is between 5°C (41°F) and 40°C (104°F). Wait until your battery has cooled or warmed up to this range before attempting to charge it.
8. Dirty Charging Port
Sometimes, all it takes to fix the issue is a bit of dirt interfering with the charging port.
Solution: Use a connector cleaner like DeoxIT Gold to clean the charging port terminals. Once they’re clean, try charging the battery again.
In Conclusion
If you’ve tried all the above solutions and your DJI Spark battery still refuses to charge, it might be time to invest in a new one. Batteries are essential components, and proper care is crucial. Always follow the manufacturer’s recommendations for storing and maintaining your batteries to ensure they have a long and healthy life.
I hope this guide has shed some light on your DJI Spark battery troubles. If any of the solutions helped revive your battery, don’t hesitate to share your success in the comments below and help out your fellow drone enthusiasts. Happy flying!
See Also:
- DJI Battery Not Charging
- DJI Mavic Pro Battery Not Charging
- DJI Phantom 4 Battery not Charging Fix
- DJI Mavic Air Battery Not Charging No Lights
- How to Connect Syma Drone to Phone
- DJI Mavic 3 Repair
- DJI Mini 2 Gimbal Stuck
- DJI Mini 3 Pro Gimbal Stuck
- How To Fix a Drone Propeller that Won’t Spin
- Why is My Drone Not Responding to Controller
- Drone Repair Near Me
- DJI Mini 3 Pro Obstacle Avoidance
Leave a Reply